Hi, some time ago I wrote a hardening guide for (non-managed) Cisco APs. See
http://www.ernw.de/content/e7/e183/e691/download693/ERNW_hard_cisco_aps_erey_ger.pdf your scenario is covered within. thanks, Enno On Wed, Dec 05, 2007 at 12:02:16PM -0600, Dan Letkeman wrote: > Hello, > > I'm new to using access points and what I would like to do is setup an > 1131ag with a trunk to a 2960 switch, then have two different ssid's which > would be mapped to two different vlan's on the 2960. Does anyone have an > example config for something like this? > > Thanks, > Dan. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ -- Enno Rey ERNW GmbH - Breslauer Str. 28 - 69124 Heidelberg - www.ernw.de Tel. +49 6221 480390 - Fax 6221 419008 - Cell +49 173 6745902 PGP FP 055F B3F3 FE9D 71DD C0D5 444E C611 033E 3296 1CC1 Handelsregister Heidelberg: HRB 7135 Geschaeftsfuehrer: Roland Fiege, Enno Rey _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
