DS-3 over coax is limited to 450 feet using 75 ohm cables . On Dec 5, 2007, at 9:18 AM, jp wrote:
> If you've got two coaxes, you could do a DS3 over it. > > On Tue, Dec 04, 2007 at 08:14:47PM +0200, Arie Vayner wrote: >> You might want to get a CMTS and some cable modems and run DOCSIS... >> >> Arie >> >> On Dec 4, 2007 4:07 AM, Dracul <[EMAIL PROTECTED]> wrote: >> >>> Hi Guys, >>> >>> I'm reviewing cabling solutions. Has anyone tried the ethernet >>> over coax? >>> Has it improved over the years (they claim to reach 100Mbs)? >>> especially >>> with >>> using Cisco? splitters are still >>> going to be used and I assume there's no Switch 2900,3700 series >>> that >>> cisco >>> can support for these kind of cabling. I was looking into the >>> cables for >>> evaluation to use in Video on Demand solutions. Hope anyone can >>> shed light >>> on the pros and cons for ethernet over coax. >>> >>> regards, >>> chris >>> _______________________________________________ >>> cisco-nsp mailing list [email protected] >>> https://puck.nether.net/mailman/listinfo/cisco-nsp >>> archive at http://puck.nether.net/pipermail/cisco-nsp/ >>> >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ > > -- > /* > Jason Philbrook | Midcoast Internet Solutions - Wireless and DSL > KB1IOJ | Broadband Internet Access, Dialup, and Hosting > http://f64.nu/ | for Midcoast Maine http://www.midcoast.com/ > */ > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
