I'm confused... there is no GigE ports on these cards .. the link you sent refers to much older hardware - is there something I still need to do on newer hardware to "stack" them together?
Thanks very much, Paul -----Original Message----- From: Łukasz Bromirski [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 11, 2007 9:01 AM To: Paul Stewart Cc: 'cisco-nsp' Subject: Re: [c-nsp] NM-16ESW Problem Paul Stewart wrote: > Hi folks.. > > Having a problem passing layer3 traffic via SVI on a NM-16ESW module and > stumped ;) > > Cisco 3825 router with (2) NM-16ESW modules: Remember You need to "stack" etherswitch modules together if they're installed in one chassis. If You don't do this - various things will happen: "Q. How do you connect two EtherSwitch modules in the same chassis?" http://www.cisco.com/en/US/products/hw/modules/ps2797/products_qanda_item091 86a00802c9e7a.shtml#qa1 -- "Don't expect me to cry for all the | Łukasz Bromirski reasons you had to die" -- Kurt Cobain | http://lukasz.bromirski.net No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.17.0/1180 - Release Date: 12/10/2007 2:51 PM No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.503 / Virus Database: 269.17.0/1180 - Release Date: 12/10/2007 2:51 PM _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
