I could be missing something obvious but metrics should do the trick here. ad your second route this way
ip route 0.0.0.0 0.0.0.0 10.50.5.24 254 The higher metric makes this route less prefered. Hope this helps. ----- Original Message ----- From: "Dan Letkeman" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Tuesday, December 11, 2007 3:00 PM Subject: [c-nsp] default route behavoir > Hello, > > I'm unsure how the default route behavior is supposed to be on a 3560 > switch. I have a remote office that is connected with two wireless links > to > a main building. Right now I have this in my configuration for > redundancy, > but it is using both links and just randomly taking either one. > > ip route 0.0.0.0 0.0.0.0 10.50.6.2 > ip route 0.0.0.0 0.0.0.0 10.50.5.24 > > Is there a way to tell the switch to only use 10.50.6.2 and not use > 10.50.5.24 unless 10.50.6.2 is down? > > Thanks, > Dan. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
