Hi Folks.
I need some help here. Can anyone figure this out.
The setup is like this.:
172.17.2.0/25
172.17.2.128/25
--------------------- > 172.16.0.0/16 for dial in users via radius
ß--------------------
Router 1 ------ area 1
-------- router 1-1 area 1
| Area 0
|
|
|
|------ PIX 1 ---IPSEC Tunnel with ospf ---- PIX 2
--------|
|
|
Router 2 ----- area 2
--------- router 2-1 area 2
192.168.188.0/25
192.168.188.128/25
-------------- ---------> 172.28.0.0/16 for dial in users via radius
ß--------------------
I'm using 2 ASA pix to setup a IPsec tunnel between 2 to networks.
I'm transporting ospf trough this tunnel.
The routers are as5300 dial-in access servers using large scale dial in and out.
In the ospf process on the pix I'm matching routes from area 1 and 2 via prefix
lists.
My problem is I'm seeing routes from area in area 2 and visa versa.
I have tried both ways in and out in the ospf process, but with no luck.
Can it give problems using the same area on both sites ??
/Arne
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
