Yes, of course it is. You have to use different group numbers per sub-interface though. On a 6500 with a SVI, for example, you can use the same group number on all of your VLAN interfaces. For a router with 802.1q sub-interfaces you would have to use a different sub-interface.
HTH, Fred Reimer, CISSP, CCNP, CQS-VPN, CQS-ISS Senior Network Engineer Coleman Technologies, Inc. 954-298-1697 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ultra Sent: Tuesday, December 18, 2007 7:05 AM To: [email protected] Subject: [c-nsp] GLBP over 802.1q subinterface Hi all, I tried to find the answer by myself but I didn't find it. The question is very simple, is possible to execute GLBP over 802.1q subinterface? I am not sure since I don't know which is going to happen with STP. Any experience with that? The reason is that I want to create subinterfaces in order to use 802.1q and VRFs but I am not sure if it is going to be possible in my actual scenenario. Any comments is appreciated. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
