On Tue, 18 Dec 2007, neal rauhauser wrote: > Can anyone comment on RSP redundancy with SSO mode? > > I have a test 7507 with rsp-k4pv-mz.120-32.S8.bin on both RSP2s. I've done > this: > > service single-slot-reload-enable > > > redundancy > no keepalive-enable > mode sso > > And it doesn't seem to ever sync the slave
Try adding: hw-module slot 2 image slot0:/rsp-k4pv-mz.120-32.S8.bin hw-module slot 3 image slot0:/rsp-k4pv-mz.120-32.S8.bin slave auto-sync config And then (make sure to wr mem first): hw-module standby-cpu reset > Peer (slot: 3) information is not available because it is in 'DISABLED' > state Sounds like the slave RSP didn't boot, I'm guessing because of one of the above. Make sure the image exists in both slot0 and slaveslot0. Andy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 --- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
