Except for on the 4500 platform, which has some restrictions. But for the 6500's you should be fine to use all of them on any module, including redundant SUPs. You probably have a bad port, bad optics, or bad patch cable.
Fred Reimer, CISSP, CCNP, CQS-VPN, CQS-ISS Senior Network Engineer Coleman Technologies, Inc. 954-298-1697 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of chip Sent: Wednesday, December 19, 2007 12:40 PM To: Drew Weaver Cc: [email protected] Subject: Re: [c-nsp] Real brief question On Dec 19, 2007 12:19 PM, Drew Weaver <[EMAIL PROTECTED]> wrote: > Howdy. > > <snip> > > My question is > > Are you "not able" to use the interfaces on a "standby" Supervisor 720 if > you are in SSO mode? > > Thanks, > -Drew > > There should be no problem with this. I've used all 4 ports at the same without problems. --chip -- Just my $.02, your mileage may vary, batteries not included, etc.... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
