We have used circulators to save thousands / month, I began building them using oem fiber parts about 18 months ago. I never put 1310 in production, but it worked in the lab. At 1550 they just work, we keep a spare tested set on the shelf for emergencies. You can also now purchase bi-direction gbics/sfp btw...
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Shaw Sent: Tuesday, January 08, 2008 5:04 PM To: [email protected] Subject: [c-nsp] [OT] Driving 1310nm optics through 1550nm circulators Hi, Apologies for the off-topic post, but I figured there'd be a few fibre optic guru nerd types out there. I need to connect some equipment (a router to a switch) via a dark fibre service. At each end, the service is presented as TX and RX on an optical circulator -- the fibre run itself is a single strand. My media converters are 100BASE-TX to 100BASE-FX, single-mode, 1310nm models, but the circulators are 1550nm models. I have been advised that my 1310nm optics should operate correctly, end-to-end, through the 1550nm circulators (albeit with 2-3dB extra loss -- still within our tolerances). Without knowing the underlying theory, or having the time to learn it, it's hard to approach the install with much confidence. Has anyone done this? Can anyone provide a concise explanation as to why it will or will not work? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
