Well, for IOS versions 12.2SX you must first set the flow-mask to interface-full via:
>mls nde interface then ... >mls sampling packet-based 128 128 is the closest option to 1 every 100 packets per flow. Good luck. The documentation is confusing to begin with, and then considering different IOS's makes it worse. http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/nde.html http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/configuration/guide/netflow.html Joe Hyunseog Ryu <[EMAIL PROTECTED]> Sent by: [EMAIL PROTECTED] 01/10/2008 11:27 PM To Cisco NSPs <[email protected]> cc Subject [c-nsp] Netflow sampling rate configuration? -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Guys, I'm using IOS 12.2(14r)SZ1. ~From IOS 12.2, is there any way to set sampling rate for netflow data? I would like to collect 1 netflow data per every 100 flow. I tried to check ip flow-export options, but no option for setting sampling rate for net flow data export. Thanks in advance. Hyun -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHhvAVZkEzJIVS03MRApyBAJ96tCXXysRcDiilULOJjscf6R0tfwCgm+J1 FoyvpqkC+nxJdFA9PtOzEdk= =Q2gD -----END PGP SIGNATURE----- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
