On Fri, 11 Jan 2008, Peter Rathlev wrote: > tried "mtu 1520" and "mpls mtu 1520" as stated in the document? OTOH it > should have complained if you configured an MPLS MTU larger that the > interface MTU.
It works just fine to have mpls mtu higher than interface MTU, in effect these two do the same thing (with reservation that I might have forgotten some protocol in example 1): example 1: int gi0/0 mtu 1546 ip mtu 1500 clns mtu 1500 example 2: int gi0/0 mpls mtu 1546 All protocols inherit "mtu", if you do "mpls mtu" then only mpls will have the higher mtu and all other protocols will inherit the default ethernet 1500 mtu. -- Mikael Abrahamsson email: [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
