At 06:46 PM 1/15/2008 +0100, Peter Rathlev observed: >Hello, > >This may be a stupid question, but I was wondering how Etherchannel hash >calculations treat MPLS traffic: Do they dive into the packet and >calculate hashes based on encapsulated traffic, or is it based on the >labels?
For MPLS frames with 3 or fewer labels in the stack we look at the IP header to make the hash decision. Otherwise, we look at the bottom two labels up to the 5th. >The context is that I'm trying to find out how the WS-X6704-10GE >compares to using Etherchannels on e.g. a WS-X6748-SFP. The EC decision criteria is identical on these two linecards. Tim > We're talking >4-5 gigs peak, maybe a gig baseline, and this number only goes up of >course. > >Thanks, >Peter > > >_______________________________________________ >cisco-nsp mailing list [email protected] >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ Tim Stevenson, [EMAIL PROTECTED] Routing & Switching CCIE #5561 Technical Marketing Engineer, Data Center BU Cisco Systems, http://www.cisco.com IP Phone: 408-526-6759 ******************************************************** The contents of this message may be *Cisco Confidential* and are intended for the specified recipients only. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
