As someone stated earlier, the ISL is for TokenRing, but they are still
100baseT adapters as long as you don't need the ISL functionality. I know the
PA-2FE-TX is the right choice, but years ago when that board and the 7206 came
out, I used a couple of them for some LAN segments and they worked fine.  In
fact I know I even did some .1q trunks, so most of that must work.  

So is it the best option, no, but will is work for basic FE service, well my
experience has shown they will.  So if you have them on hand, or got some
cheap, I'd at least give them a try and see if they will work for your needs..



---
Howard Leadmon 

 
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:cisco-nsp-
> [EMAIL PROTECTED] On Behalf Of Joe Pruett
> Sent: Tuesday, January 15, 2008 5:20 PM
> To: [email protected]
> Subject: [c-nsp] pa-feisl-tx cards
> 
> i want to add some fast ethernet ports to a 7206vxr and i see lots of
> feisl cards out there, but i can't find enough info on the web to tell if
> they function as normal fastethernet interfaces and support 802.1q
> tagging. i understand they are eol'ed, but seem to be supported still.  i
> can live without autonegotiation (since cisco has never gotten that right
> :-).
> 
> can anyone shed light on just how different the isl versions are from the
> regular fe cards?
> _______________________________________________
> cisco-nsp mailing list  [email protected]
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/


_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to