Hi Suzan - Not sure if anybody has replied -
On your first question below: You have not indicated which platform/hardware information along with the IOS that these are running for FC. As a good starting point, you can take a look at the following info. http://www.nanog.org/mtg-0310/filsfils.html http://www.nanog.org/mtg-0405/vemulapalli.html [later part of the presentation covers some FC topics] http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fstfld.html http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/fsisiadv.html More information can be gleaned from the www.cisco.com. On your second question: Domain password: is for IS-IS level-2 Area password: is for IS-IS level-1 The following URL should be able to answer the other questions on configuration piece. http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_ chapter09186a00804557c7.html Hope it helps. /Shankar -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Suzan S. Sent: Sunday, January 20, 2008 12:20 AM To: [EMAIL PROTECTED]; [email protected] Subject: [c-nsp] ISIS/OSPF covergence & ISIS packets authentication Dears, What are the commands used for fast convergence for the ISIS & OSPF when link fails, adjacency rebuild with less CPU, bandwidth & recalculation. For the ISIS authentication when to use the domain & area password commands , how to authenticate adjacency & how to authenticate the ISIS packets. Thank you Suzan --------------------------------- Looking for last minute shopping deals? Find them fast with Yahoo! Search. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
