Hello Future CCDEs, I have a router with dual WAN and one of them is in a VRF-lite, nothing there but another default route. I would like to be able to utilize that default route once the primary WAN is down. I have ip route 0.0.0.0 0.0.0.0 SecondaryWAN 250. When the primary interface down, i can see that in the global routing table. I have NAT and show ip nat trans seems okay. Turn on netflow and doing a source ping, i also see echo-reply packets back from the ping source. The local LAN is not inside the vrf-lite. Looking inside the vrf routing table, i dónt see the local lan. i cánt do ip route vrf vrf-lite local-lan-net interface-local-lan, since the router doesn't let you do it to the broadcast ethernet. result of show ip cache flow, destif is the same as srcif...look like the router doesn't know where the LAN is?
SrcIf SrcIPaddress DstIf DstIPaddress Pr SrcP DstP Pkts Fa0/0 ping-destination Fa0/0 vrf-lite wan int 01 0000 0000 2 Thanks. -lmn _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
