On Fri, 2008-01-25 at 12:47 -0500, Aaron wrote: > I'd look at assigning /31s instead. Most recent version of code support it > now.
IOS 12.2(35)SE5 does for the 3750s yeah, but since Ethernet strictly speaking never is a point-to-point interface, I don't think Cisco supports it. Configuring it gives: Switch(config)#interface GigabitEthernet1/0/1 Switch(config-if)#no switchport Switch(config-if)#ip address 10.0.0.0 255.255.255.254 % Warning: use /31 mask on non point-to-point interface cautiously Switch(config-if)#do show version Cisco IOS Software, C3750 Software (C3750-IPBASEK9-M), Version 12.2(35)SE5, RELEASE SOFTWARE (fc1) <snip> But it should work. :-) Regards, Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
