Hi all, I am using two links for BGP. is there a way I can do preference to use the other line first? Let's say I prefer neighbor yyyy what config should I add below? Thanks!
router bgp xxxx no synchronization bgp log-neighbor-changes network 203.xxx.xxx.0 aggregate-address 203.xxx.xxx.0 255.255.255.0 neighbor 123.xxx.xxx.xxx remote-as zzzz neighbor 123.xxx.xxx.xxx description *** BGP transit to PROVIDER 1 *** neighbor 123.xxx.xxx.xxx password 7 011A08105E191200344F464D4B5C404A58 neighbor 123.xxx.xxx.xxx ebgp-multihop 2 neighbor 123.xxx.xxx.xxx version 4 neighbor 123.xxx.xxx.xxx soft-reconfiguration inbound neighbor 123.xxx.xxx.xxx prefix-list MARTIAN in neighbor 123.xxx.xxx.xxx route-map itt_out-ISP1 out neighbor 124.xxx.xxx.xxx remote-as yyyy neighbor 124.xxx.xxx.xxx description *** BGP transit to PROVIDER 2 *** neighbor 124.xxx.xxx.xxx ebgp-multihop 2 neighbor 124.xxx.xxx.xxx version 4 neighbor 124.xxx.xxx.xxx soft-reconfiguration inbound neighbor 124.xxx.xxx.xxx prefix-list MARTIAN in neighbor 124.xxx.xxx.xxx route-map itt_out-ISP2 out no auto-summary Regards, Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
