TAC simply said that the modular code wasn't ready, and that I should go monolithic before troubleshooting further. That solved the spikes/loss, so the case was closed. FYI, that was 12.2.SXF18 modular. In the lab, I saw similar results with all the modular SXF releases...they seemed to correlate with snmp polling (I was running cacti against it).
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Fredrik Jacobsson Sent: Tuesday, January 29, 2008 11:59 PM To: Gregori Parker Cc: Peter Rathlev; Jeff Fitzwater; [email protected] Subject: Re: [c-nsp] 6500 12.2.33-SXH1 modular IOS Hi! What did the TAC say? Do you have a BugID to look for? Regards /Fredrik 2008/1/29, Gregori Parker <[EMAIL PROTECTED]>: > Crippled indeed - I had 5sec-CPU samples spiking to 80% and above, > causing packet loss in our core with all SXF modular releases. Because > of this, modular code has been relegated to the most experimental > reaches of our network lab...I'm in wait-and-see mode for SXH. > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
