Yeah, that's what I was thinking too. We use these for layer 2 everywhere. Being a US govt network, we're required to have IPv6 support on those as well. V6 management is all we really need on 3550.
Chuck -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Saku Ytti Sent: Friday, February 01, 2008 8:15 AM To: [email protected] Subject: Re: [c-nsp] IPv6 on C3550, finally? (12.2(44)SE) On (2008-02-01 08:56 +0100), [EMAIL PROTECTED] wrote: > And what's the point, anyway? As far as I know the 3550 *hardware* > can't do IPv6 routing. As long as you're talking about *software* > IPv6 routing, a suitable 2800 router would probably give you better > performance... I'd never plan to route IPv6 in 3550, MGMT via IPv6 on the other hand might be interesting in foreseeable future. -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
