Hi, If you just need L4 access-lists, like blocking all port 80/tcp traffic and not all HTTP (which could use another port and thus needs a more thorough examination of the flows), you can use regular hardware based access-lists on a Sup720/PFC3 and all will be well.
If you need inspection (like the PISA gives you) Oliver's options seem like the way to go. Regards, Peter On Fri, 2008-02-01 at 15:47 +0200, Konstantin Barinov wrote: > Hello! > > Which platform will be able to filter more than 2 Gbit/sec bandwidth > by packet contents? For example, I need to drop all outgoing http and > udp according to some rules. Sup32-PISA can only do up to 2Gbps. What > is the next step, load balance between them only? > > > br > -- > Konstantin Barinov > INFONET AS, Tallinn, Estonia > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
