On 2/1/08, Gregory Boehnlein <[EMAIL PROTECTED]> wrote: > > > >> Try putting a 12 db attenuator on the transmit portion, then re-try > > your > > >> loopback. We've found that the PA-MC-T3 cards tend to overdrive the > > DS3 a > > >> bit, and the only way that we've been able to get rid of the errors > > is > > >> attenuating the transmit load. > > > > > > Interesting, you're saying to put an attenuator on the transmit > > portion of > > > the card. Some of the Cisco documentation is saying to put it on the > > receive > > > portion. Is there any way using the "show controller" output to tell > > which > > > one has the "hot" signal? > > > > He meant on the PA's receive (the telco's transmit). PA-MC-T3s are > > somewhat notorious for being sensitive to overly hot signals...where > > cisco's definition of 'overly hot' is 'normal' to several other > > vendors. > > > > In a pinch, if you can't find a suitable attenuator, you can use a > > really long service loop and/or multiple DS3 cables connected together > > using barrel connectors. We have at least one installation where after > > switching from a CAC Widebank28 to an Adtran mux, we ended up needing a > > coiled up 50' "service loop" sitting on top of the mux to keep the > > PA-MC-T3 happy. > > Jon, yes.. thank you .. that was exactly what I was getting at.. > > We, too, have several DS3's w/ 75 feet of coiled up cable sitting in the > bottom of a cabinet to get the Adtran MX-2800s and the PA-MC-CT3's to play > nice together. I know that to most people that sounds counter intuitive, > but > keep in mind the signals were meant to be driven over much longer > distances > than the typical 6 foot Patch Panel to CPE that exists in lots of data > center installations.
Ok this might sound weird but I LOVE YOU GUYS. We've been having this problem using an adtran mux. Line code violations and P-bit errors all over the place on only one end. I was just about to email the list when I thought I'd better search for this problem. I'm going to try the stuff suggested now. Thanks! Joseph _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
