Hi, it most likely depends on the interface you are trying to rate-limiting rather than the IOS. On FlexWANs you can use CAR; you can't on SPAs and Sup720/RSP720 upstream interfaces.
Btw, why don't you like policing via MQC? It simply works well and it's supported on pretty much all the current Supervisors, Carrier Ethernet and WAN line-cards. Cheers, Paolo On Mon, Feb 04, 2008 at 09:33:26AM +0200, Ciprian Radu wrote: > > Hello, > > > I have a Cisco 7606 Cisco router RSP 720 and have a quite simple > question to ask. > > On another equipment I saw the rate-limit command used on interfaces and > I need to do the same thing (as using police maps just to rate limit > traffic doesn't seem like best practice). > > But unfortunately I don't have this command. > > Does this pertain to the IOS being used ? > (Cisco IOS download section only offered the 12.2.(33) series for my sup > and I'm using 12.2(33)SRC) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
