Make sure on the interfaces you want to monitor, you have 'logging event link-status'
Ken Matlock Network Analyst (303) 467-4671 [EMAIL PROTECTED] -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of William Sent: Monday, February 04, 2008 10:32 AM To: [c-nsp] Subject: [c-nsp] Cisco 4500 not showing all the log detail? Hi, I have a Cisco 4500 running 12.1 IOS code. It would seem we are not getting up/down port events in the log buffer, to setup logging we have: logging source-interface Vlan1 logging 192.168.1.1 we did set the logging buffer to informational (this doesnt show in show run for some reason?), this is confirmed in 'sh logging' but we aren't seeing the information we would expect! Is there something I've missed? I am getting messages on counters being cleared and configuration from console but that seems to be it. Cheers, W _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
