Hey all,
I'm currently planning an IP migration, and one of the issues I'm going to
hit and I'm not sure of the way around it... traffic coming into new_int
will get translated from 192.168.2.1 -> 10.10.10.1, however as the default
route on the FWSM point out via old_int it won't get passed through as their
will be no existing connection... if I change the default route, that will
work for new connections inbound, but then break the existing outbound
statements...
192.168.1.0/24 192.168.2.0/24
| |
Old_int new_int
| |
192.168.1.1 192.168.2.1
+------------+------------+
|
10.10.10.1 (CSM VIP)
/ \
10.11.11.1 10.11.11.2
How would you go about doing this without it being a big hit changeover?
Thanks for any advice/ guidance,
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
