I need to set up ports on a 2960-24TC-L so that outbound ports retain the VLAN tag.
I have configured the ports as trunks with VLAN IDs 7 and 13. The native VLAN is 13. This should tag any inbound untagged packets with VLAN 13. This is what I want, but outbound packets are a different story. The command reference states in the Usage Guidelines for the "switchport trunk" command that "If a packet has a VLAN ID that is the same as the sending-port native VLAN ID, the packet is sent without a tag; otherwise, the switch sends the packet with a tag." My interpretation of this is that outbound packets with VLAN ID 7 will be sent with the tag, but packets with VLAN ID 13 will be sent without the tag. Is there anyway to not have this tag removed? In case it is of any use these are the commands that I am using: interface FastEthernet0/1 switchport mode trunk switchport nonegotiate switchport trunk native vlan 13 switchport trunk allowed vlan none switchport trunk allowed vlan add 7,13 Thanks! == al _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
