On (2008-02-08 19:51 +0200), Tassos Chatzithomaoglou wrote: Hello Tassos,
> vlan 3500/x -------------- vlan 3600/x > 6500 ---- 7600 ---- 6500 > > 1) Will the following work? Should work. If not, it's config error, but what you want to do is supported. > 2) If i want to terminate locally on the 7600 an inner vlan, can i use the > following along with the above translation: Will work as is. > 3) What kind of egress QoS can i use on the main interface and on the > subinterface? I did some tests but i wasn't successful. On egress you can only shape, policer is possible in hardware but not supported today. On ingress you can only police, shaper is not supported in hardware. So change police to shape. This should work in subinterface. > 7609#sh policy-map TR2 > > Policy Map TR2 > Class class-default > Average Rate Traffic Shaping > cir 50000000 (bps) > > 7609(config-if)#service-policy output TR2 > Service-policy can not be applied to main interface when service-instances > are configured. Apply it under the EVC instance configration, it should work as-is. Matching in EVC is very limited, only CoS so far, it's software not hardware limitation. I was extremely disappointed to notice that ES20 does not support locally signifacant VLAN subinterfaces when using single tags, when using double tags it does. This however should be fixable in unknown time frame (I'd recommend to wait if this is important requirement and tell your account team it's stopping you from investing in this card). Thanks, -- ++ytti _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
