-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Did you check following ? - - Clocking : unless transport gear provide it, one side should be internal, and other side should be external. - - FCS/CRC : 32 bit ? or 16 bit ? Probably 32 bit... - - scramble : Probably off - - Fiber mode : SMIR or something else ?
Hyun Chris Chaundy wrote: | Is anyone aware of compatibility issues between the current generation POS | PA¹s (PA-POS-1OC3 in particular) connected to an old model GSR line card | (LC-4OC3/POS-SM, yes, the engine 0 card!)? We have been trying to bring up | a new circuit and each interface works fine when looped up to the last OFTP | before the other router, but when you connect them, the circuit gets B3 | error threshold exceeded, TC alarm declared syslog messages. The circuit | then drops, the alarm is cleared and it comes back up again to get the error | again (so it is continuously flapping at a rate of a couple of times a | minute). | | Thanks. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHsP7rZkEzJIVS03MRAquuAKC0dZLvgLKPVtVBv2zomOovxR86EgCeJgVE LhewgoHJMN105u1zdPgO6D0= =zese -----END PGP SIGNATURE----- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
