Patrick Muldoon wrote: > On Feb 13, 2008, at 5:44 PM, Thorsten Dahm wrote: >> What's about Nagios? Sure, it's a bit overkill for what you want, but >> you don't have to use the full featureset if you don't want to. > > EVENT linkUp .1.3.6.1.6.3.1.1.5.4 "Status Events" Normal > FORMAT Link up on interface $1. Admin state: $2. Operational state: $3 > EXEC echo "[EMAIL PROTECTED] PROCESS_SERVICE_CHECK_RESULT;$r;TRAP;0;$2 linkUp > : $4" > >>/var/spool/nagios/rw/nagios.cmd > > But with using the above with nagios, it is kind hard to clear the > alarms if you have multiple interfaces going up/down on 1 box since > nagios seems to track status for the entire service.
You can also track on a per-interface basis, but don't ask me how, it's too long ago when I did this the last time. You have to define the specific Interfaces in a cmd file and then Nagios will track the Chassis but also the different interfaces seperately. cheers, Thorsten _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
