On Fri, Feb 15, 2008, Joseph Jackson wrote: > vpdn username [EMAIL PROTECTED] password ********* > All the commands go in ok but when I do a debug pppoe packets it looks like > the pix can't find the pppoe server. It does the discovery but never gets a > response so fails. The telstra setup email includes an ATM VPI/VCI number > but the pix doesn't support that (I'm guessing its only for routers). I do > not have outband access to the device and have been working with the > datacenters smarthands through webex (love it).
> I haven't been able to get in touch with Telstra as its the weekend over > there but I was wondering if you guys have come across this issue before. Uhm, do you understand how its all meant to hold together? If its a normal DSL service today then its PPP of some sort over ethernet of some sort over an ATM VC. You've got a modem device that has the VPI/VCI correctly configured, and acting as a real bridge? Adrian (Who does that sort of stuff in Australia for a living .. occasionally.) _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
