> > Phil > > On Feb 16, 2008, at 11:05 AM, Zahid Hassan wrote: > >> Dear All, >> >> >> I am trying to increase bandwidth between my 7600s running as >> PE/P routers with 1G line cards terminating dark fibre links. >> >> I am exploring the following two options: >> >> Option I >> --------- >> - replace the 1G lines cards with 10G on the 7600s >> - terminate the dark fibre links on the 10G line cards
Do the 1G cards have to come out? See below. >> >> Option II >> ---------- >> - terminate the dark fibre links on passive CWDM MUX >> - EtherChannel multiple 1G interfaces over CWDM MUX >> If you were to run *D* WDM, you could run 10G and 1G MUXed over the same fibre, offering card/xenpak failure protection, giving you some connectivity in the event of a 10G failure. Or even multiple 10G, to save you from individual XenPak, but perhaps not linecard failure. Depends how much money you want to spend, and what your topology is. I've 1G links running alongside my 10G, as all my 10G in each chassis is on one card, and I decided that all my eggs in one slot was not too clever an idea (as rare as linecard failures seem to be ;) ). That said, I've lots of pairs, as it's a campus environment, and I just added the 10G alongside my existing 1G links. -- ian _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
