Does anyone know if there's a certain ROM version or jumper setting that required to support more than 32MB of RAM in an AS5300? I've tried upgrading one of our old 5300s to 128MBs twice now. The first RAM supplier was a questionable source. The second vendor was a little more well-known but also known for being questionable for over-clocking high performance RAM to resell to gamers. RAM for the EoLed 5300s is hard to find at a reasonable price so you pretty much have to take what you can find. Both times the 5300 thought it only had 32MB of RAM in it. I saw a wire frame drawing on Cisco's site last week that pointed on the location of 2 RAM slots on the main PCB. It also showed 2 sets of jumpers but it didn't talk about the jumpers at all (I mean literally they said nothing about them even though the showed them on the drawing and IIRC zoomed in on their positions).
So, is there some trick to getting 128MB support in an AS5300? I have 3 other 5300s but I can't take them out of service and disassemble them to check their jumper positions or test the new 2x 64MB RAM sticks in one that already has 128MB running in it successfully. Thanks Justin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
