Hi Guys, I'm having some trouble with my PPPoE relay setup. I have 1811s relaying to a 7204-g1 which terminates the l2tp tunnels using vpdn multihop. Authentication is via radius, and done my the 7200 only. The problem is that any PPPoE sessions which come in on a dot1q subint are reported in the radius accounting log as being NAS-Port = 0. The system works fine if the PPPoE session terminates on a normal interface or a vlan interface.
I've tried using "radius-server attribute nas-port format d" on both the 1811 and the 7200, but it hasn't fixed the issue, I expect because the 1811 is not actually using radius, it's all done by the 7200. Any ideas on how to get a proper NAS-Port value? Thanks, Andrew _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
