[EMAIL PROTECTED] <> wrote on Tuesday, February 19, 2008 8:32 PM:
> Hi,
>
> Sometime ago I saw a document about how Policer evaluate multiple
> statements. But could not found it. Any indication?
>
> For example, how policer will evaluate a packet entering interface
> gi3/6?
> (it will be evaluated against class allIP and class TFTP in any case,
> or depends if it matches class allIP?)
>
> class-map match-all TFTP
> match access-group 123
> !
> class-map match-all allIP
> match access-group 122
> !
> policy-map l2policer
> class allIP
> police 50000000 conform-action transmit exceed-action drop
> class TFTP
> police 1000000 conform-action drop exceed-action drop
> !
> interface GigabitEthernet3/6
> service-policy input l2policer
MQC generally matches in the order the class-maps are defined within the
policy-map, so if your traffic matches both acl 122 and 123, it will end
up in class allIP.
oli
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
