And if you change EIGRP K values, don't break the network! ;)
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ben Steele Sent: Monday, March 03, 2008 2:54 PM To: Higham, Josh Cc: [email protected] Subject: Re: [c-nsp] eigrp and ospf on same switch On 04/03/2008, at 2:25 AM, Higham, Josh wrote: > > A small note, the default for EIGRP is to only consider bandwidth and > delay, so the other values will have no impact. Another small note :) is that despite the fact EIGRP doesn't use all the metrics to calculate its path you do need to fill all 5 out if you choose to set a metric when redistributing. hence why I told him to use 255 1 and 1500 as while he doesn't really need to "care" about these values, he still needs to enter them. Ben _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
