My 2511 died some time back (PSU failed I think) but I was wondering if one could point a static route (/32) at an Async line and redistribute that into the IGP. Then you could write a simple bash wrapper around telnet to connect you to that specific IP. The only thing I don't know is if you'd be able to connect to it on tcp/23 or if you'd also have to use the assigned rotary port in the 2000 range. I suppose it's possible to use PBR to redirect tcp/23 on a specific IP to a specific local 2000 port if needed. Or you could just write a wrapper around telnet to use Lo0 and the assigned rotary port. You might test it both ways to see if one works.
Justin Eric Helm wrote: > Hi, I'm configuring some 2511RJs for a lab terminal server environment. > I'm interested in using the IOS menu system to ease user access to the > async lines. Does anyone have a good sample configuration to send my way? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
