Bruno Filipe <> wrote on Thursday, March 06, 2008 12:35 PM:
> Hi there...
>
> I'm facing a problem with a 3825 after upgrading from 256 RAM to two
> 512 DIMM modules...
>
> that's the OUTPUT from the console.
>
>
> *Mar 6 11:22:58.627: %SYS-4-NV_BLOCK_INITFAIL: Unable to initialize
> the geometry of nvram
> *Mar 6 11:22:58.859: NV: Invalid Pointer value(6307D87C) in private
> configuration structure
> *Mar 6 11:22:59.091: NV: Invalid Pointer value(6307D87C) in private
> configuration structure
> [..]
>
> I installed a brand new image *c3825-ipbasek9-mz.124-18.bin* without
> any problem and the system boots up correctly but I cannot write
> anything to the memory...
can you try "write erase" (or "erase /all nvram:", not sure) and see if
this fixes the problem?
oli
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
