Does anybody know the steps required to get an MLPPP bundle running between a Cisco (2600) and a Tasman router? I added the two Tasman T1's to the bundle and created the multilink interface on the Cisco (I have probably 10 other mlppp bundles working with cisco-cisco and they work fine). The issue is that during ipcp negotiation, the Tasman sends it's IP as the bundle ID and the Cisco seems to accept it, but the Cisco sends it's IP as the bundle ID and the Tasman doesn't appear to respond at all. I tried a bunch of ppp ipcp commands on the Cisco, but none of them seemed to make a difference. I was wondering if anybody has a reference config that actually works (for both ends). Thanks.
Peder _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
