Good analysis. Looks like we tried to read from a valid address. main:text,(r/o), main:data (r/w) and main:bss (r/w) are subregions of the local memory used for IOS. main:heap is what is left after IOS image is loaded.
main:bss contains uninitialized variables. /eninja On Wed, Mar 12, 2008 at 2:04 AM, Werner Detter <[EMAIL PROTECTED]> wrote: > Hi again, > > > crashed due to a bus error (bus error at PC 0x6013C4D8, address > 0x64588700). > > As described in the Cisco document "Troubleshooting Bus Error Crashes" [1] > I've tried > to figure out to which memory location the address 0x64588700 corresponds > to. > 'show region' shows, that the address 0x64588700 is within the following > range: > > Region Manager: > Start End Size(b) Class Media Name > 0x644B95A0 0x64A8357F 6070240 IBss R/W main:bss > > As i understand this output, it means that the router was accessing a > valid address, > but the hardware corresponding to that address is not responding properly > and there > may be a hardware problem. > > "Main" corresponds to main memory or dynamic RAM (DRAM) but what exaclty > stands > "main:bss" for? What do you suggest? > > Any help or comments appreciated, > Werner > > > [1] > http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_tech_note09186a00800cdd51.shtml > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
