Hi, We have a situation where one of the PEs (6500, call it PE1) have multiple interfaces towards the same customer. The customer has a few other sites connected to different PEs. A few of the networks visible on PE1 in their vrf should only be visible to customer devices connected to that PE. We run eBGP with them so atm the redistribution happens automatically.
I tried to use an export map and remove the route-target exports all together. The route-map specified uses a prefix list to figure out what RT should be used, like this: route-map EXPORT-FROM-VRF4112 permit 10 description All sites routes match ip address prefix-list PREFIX-CUST4112-ALL-SITES set extcommunity rt xxy:4112 (the defaut RT for this customer is 4112) but on our route servers I can still see the other prefixes, but without the RT at all! Of course they don't get inserted anyway. Is that supposed to work, did I got it wrong, or is it a bug? kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
