Normally people would put like show below.. WAN-Router<--------->Firewall<------>LAN-Switch
Regards, Masood Ahmad Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sridhar Ayengar Sent: Monday, March 24, 2008 9:55 PM To: Cisco NSPs Subject: [c-nsp] External Firewall I'm interested in adding a firewall to a network I admin at work. The gateway router on the network is a 7200 NPE-G1. What I want to know is whether I have to route all of my packets through my external firewall, or is there a way to have the firewall set state in the router to enable it to route packets in a session without the further involvement of the firewall? Peace... Sridhar _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
