On Wed, Mar 26, 2008 at 02:36:56PM +0200, Dmitry Kiselev wrote: > Hello! > > I there any way to set some dscp value to packets originating > from Cisco IOS itself? I mean syslog messages, netflow data export, > snmp messages, icmp and so on. I know about default cs6 marking > for routing protocols, but it is not all traffic :) > Could anybody point me to right direction? Thanks! > > P.S. platforms are C7600 and Cat3750 > > -- > Dmitry Kiselev
You can use PBR to mark the local generated traffic: ! Use ACL to specify what you want to have marked access-list 166 permit ... ... route-map local-qos permit 10 match ip address 166 set ip precedence x ip local policy route-map local-qos regards Reinhold _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
