I have the following topology Router 1(AS65501) -> Router 2 (AS123) -> Router 3 (AS456) -> Router4 (AS65504)
Router 1 is my site (private AS) R2 is network provider (public AS - I cant change config) R3 is my other site (public AS) R4 is end customer (private AS) Router 1 advertises network 10.1.1.1 to R2, then R2 to R3, R3 to R4. Problem is that I need to suppres / hide / remove the private AS of R1 by the time it gets to R4. This is because R4 can see the same private AS in use elsewhere on its own network. I would use the *neighbor x.x.x.x remove-private-as ***command but understand that this doesn't work if you have public and private AS numbers in the path. What is best practice? Thanks in advance Gary ** _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
