We just upgraded our sup from 720-3B to 720-CXL on 6500 running 12.2-33SXH1
We were using User Based Rate Limiting UBRL and all was working. QOS is enabled. I have a class map to match just the source address of hosts on a subnet that have a dst to any. The policy-map matches the class and uses the src-only flow mask to rate limit each host to 2M I apply the service-policy input (policy-map ) to a layer 2 interface gi3/2 By default QOS policing is port based. I first look at the access-list to see if it is getting any hits and it is not. So at this point no packets are being sent to the policer. I check the policy-map for the interface and it looks fine. When I change the policing to VLAN-BASED and move the SERVICE-POLICY to the VLAN, I can now see hits on access list but doing some speed tests from one of the hosts, it does not seem to limit traffic. Q. Does anybody have any ideas on this before I submit it to TAC? Its been a long day so maybe I missed something. Thanks for any help. Jeff Fitzwater OIT Network Systems Princeton University _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
