SXH2 is now available for download. Feature Navigator is not yet updated with the feature set for the SXH2 code though.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Gert Doering Sent: Monday, March 31, 2008 1:20 AM To: Juno Guy Cc: [email protected] Subject: Re: [c-nsp] Cat6500 - Support for MPLS and IPv6 Hi, On Sun, Mar 30, 2008 at 10:52:04PM -0400, Juno Guy wrote: > It is my understanding that somewhere after the 12.2SX release MPLS and IPv6 > will no longer be supported on the 6500 (but will continue to be supported > on the 7600 as I understand). Well, as far as I understand, this is currently not the case, and I haven't seen any announcement to that extent. (Except as has already been written: the *modular* variant of SXF had no support for either, but that was "not yet", and not "not any longer"). OTOH, personally, I have great distrust for the 7600/6500 BUs, and it wouldn't surprise me to come to a point in the future where I need to decide "do I want support for 32 bit AS numbers, or do I want support for my existing hardware". Cisco needs to do a *lot* to get back the customer trust that these two BUs have destroyed. gert -- USENET is *not* the non-clickable part of WWW! //www.muc.de/~gert/ Gert Doering - Munich, Germany [EMAIL PROTECTED] fax: +49-89-35655025 [EMAIL PROTECTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
