Hi, > Does anyone know if there's a bug ID for this problem? We're running > IOS 12.2(44)SE.
nice! yes, those power plugs have no retention - a failure in the design specs when they were first envisaged. some with IEC power :-| > The culprit is an Australian possum -- you'll note the missing power > cable from the switch lowest in the stack, and the precariously > positioned leads on the power strip. That's how we were first alerted > to the, er, problem. > > Probably should've been running "service anti-possum enable" read the changelog - Cisco revised this command in 12.2(30)SB1 no service possum ;-) PS If not used, i'd advise using the blanking plate to cover those DC connectors - you never know when a stray cable might enter.... _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
