Not in the typical layer 2 sense. You could accomplish this with routing depending on the scenario as you would have links between the "core switch" and the "access switches". It depends on the topology you are talking about but just straight switches, no you can't terminate ether channel on two physically different switches.
-- Regards, Jason Plank CCIE #16560 e: [EMAIL PROTECTED] -------------- Original message ---------------------- From: Peter Olsson <[EMAIL PROTECTED]> > We have a 3750 stack that we want to connect to two different > 2970 switches, for redundancy. Do we have to run this with > spanning tree, or is it possible to have one port channel > terminate in two different 2970 switches? > If it is possible, please email URL to configuration manual, > or the name of the concept so I know what to search for. > > That particular 3750 stack will soon be replaced by a 7609 with > two switch blades, both WS-X6724-SFP, but I guess that makes no > difference to the port channel question. > > The best answer is probably to replace the two 2970 switches with > another 3750 stack, but this is currently not in the budget. > > Thanks! > > -- > Peter Olsson [EMAIL PROTECTED] > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
