I have a core 6500 sup II switch that is connected to 2 default network paths. On the switch Im running EIGRP with a 0.0.0.0 0.0.0.0 X.X.X.X . When that goes down I want the default network to adjust to default network #2 0.0.0.0 0.0.0.0 H.H.H.H . what is the best practice for this? I put in a weight statement and pulled the default X.X.X.X connection but the H.H.H.H did not pick up.. Any thoughts on this?
IMPORTANT NOTICE: This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message. If you have received this communication in error, please notify the sender immediately and destroy the transmitted information. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
