I want to implement a spanning-tree configuration on my network to have redundant path in case of hardware failure.
Currently my setup is like this: FIBER ---- TRAFFIC-SHAPER-BRIDGE ---- CACHE-SERVER-BRIDGE ---- 2811 ROUTER ---- 2950 SWITCH ---- LAN As you can see if my traffic-shaper or cache-server goes down, the whole network goes down. I would like to configure a direct path from the fiber to the router in case of one of the server dies. In my lab i tried connecting all of the equipment on the switch using different vlan but I've failed miserably. Can someone guide me? Thank you! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
