A copy of your config would be useful Or at least 'sh run | inc wccp'
Cheers Mark > Date: Tue, 8 Apr 2008 16:15:24 +0100 > From: "George Horton" <[EMAIL PROTECTED]> > Subject: [c-nsp] WCCP on 3845/3745 > To: <[email protected]> > Message-ID: > > <[EMAIL PROTECTED]> > Content-Type: text/plain; charset="us-ascii" > > Hello > > > > I am trying to remove WCCP from a couple of routers a 3845 and a 3745. > > Both are giving me the same error to the command 'no ip wccp98' - 'The > WCCP service specified does not exist.' > > > > however wccp is in the config and a sh ip wccp gives me:- > > > > Global WCCP information: > > Router information: > > Router Identifier: 172.29.157.13 > > Protocol Version: 2.0 > > > > Service Identifier: 98 > > Number of Cache Engines: 0 > > Number of routers: 0 > > Total Packets Redirected: 83561186 > > Redirect access-list: -none- > > Total Packets Denied Redirect: 0 > > Total Packets Unassigned: 22 > > Group access-list: -none- > > Total Messages Denied to Group: 0 > > Total Authentication failures: 0 > > > > Does anyone have any ideas on how I can remove WCCP? > > > > Thanks > > George _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
