That will work for local BGP flaps, but if you are trying to monitor BGP flaps on the net this will not work. You could setup a router that has BGP dampening enabled, this will give you a look into flaps on the net.
harbor235 ;} On Wed, Apr 9, 2008 at 11:48 AM, Adam Armstrong <[EMAIL PROTECTED]> wrote: > Frank Bulk wrote: > > We had an incident a little over a week ago where our upstream provider > > (which managers our edge routers) told us that the BGP routes were > flapping > > between our two edge routers. > > > > Is there a MIB that we can poll to monitor the number of changes in > routing > > tables, or BGP flaps? > > > You can find out when the session last changed, how many messages have > been sent across the session and how many updates have been sent across > the session. > > Sadly i don't think there's a flap counter you can poll. > > adam. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
